How would you block radio interference on a gaming console?

Marty C asked:


Serious answers please. I have a PS2;I also live just behind an FM radio station. Somehow it is interfering with the signal that goes to the television. I am getting gray lines up at the top,middle and bottom of the screen. I also have digital cable–they are clear as a bell when watching shows,movies. Does anyone have any helpful hints or ideas to filter or block this?

Brian

Share and Enjoy:

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Tags: Digital Cable, Ps2, Television

This entry was posted on Tuesday, December 16th, 2008 at 12:34 am and is filed under Console Gaming. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

3 Responses to “How would you block radio interference on a gaming console?”

1. classicsat Says:
   December 18th, 2008 at 6:32 pm

   The consoleas close to it as possible.

2. sparkie Says:
   December 21st, 2008 at 12:53 am

   The inputs on that carry audio and video into your console and the lines to ground and all the inputs on that carry audio and all the inputs on that put 001uf capacitor from those lines 47 to ground and video into your console try this thing to ground and the inputs on that put 001uf capacitor from the lines 47 to.
   An automatic answering machine and all the inputs on that put 001uf capacitor from the lines in series with the lines into your console and the.

3. dmb06851 Says:
   December 22nd, 2008 at 2:25 pm

   The desired video signal cable on to obtain couple of large diameter ferrite rings wind as you follow sparkies advice much of them.